混合动力汽车的种类目前主要有3种.一种是以发动机为主动力,电动马达作为辅助动力的“并联方式”.这种方式主要以发动机驱动行驶,利用电动马达所具有的再启动时产生强大动力的特征,在汽车起步、加速等发动机燃油消耗较大时,用电动马达辅助驱动的方式来降低发动机的油耗.这种方式的结构比较简单,框格护坡模具 箱体护坡模具 华尔街铜牛 电阻柜 接地电阻柜 电缆保护接地箱 隔离墩模具 化粪池模具只需要在汽车上增加电动马达和电瓶.另外一种是,在低速时只靠电动马达驱动行驶,速度提高时发动机和电动马达相配合驱动的“串联、并联方式”.启动和低速时是只靠电动马达驱动行驶,当速度提高时,由发动机和电动马达共同高效地分担动力,这种方式需要动力分担装置和发电机等,因此结构复杂.还有一种是只用电动马达驱动行驶的电动汽车“串联方式”,发动机只作为动力源,汽车只靠电动马达驱动行驶,驱动系统只是电动马达,但因为同样需要安装燃料发动机,所以也是混合动力汽车的一种.
At present, there are three types of hybrid electric vehicles. One is the "parallel mode" with the engine as the main power and the electric motor as the auxiliary power. This mode is mainly driven by the engine, and uses the characteristics of the electric motor to generate strong power when it starts again. When the fuel consumption of the engine is large, such as starting, accelerating, etc, The structure of this method is relatively simple, just need to increase the electric motor and battery in the car. The other is the "series and parallel mode" that only rely on the electric motor to drive at low speed, and the engine and electric Magda cooperate to drive when the speed increases. When starting and low speed, only rely on the electric motor to drive, When the speed increases, the engine and the electric motor share the power together and efficiently. This way requires power sharing device and generator, so the structure is complex. There is another "series mode" of electric vehicle which only uses the electric motor to drive. The engine is only used as the power source, and the vehicle is only driven by the electric motor, and the driving system is only the electric motor, But because the same need to install fuel engines, so it is a hybrid vehicle